Open navigation

Release notes : Gespage Kyocera

Below you will find the release notes for the Kyocera eTerminal as well as the version history available for download in PDF format. 


GespageKyocera v1.7.6.0

Released  June 12, 2025


New features

  • Enhanced management of the Gespage Home Page
    • Gespage home page now always appears after login.
    • The display of the PRINT, SCAN and COPY buttons on the Gespage home page is customizable, either depending on the user’s access rights or through a global configuration.o
    • The destination of the SCAN button is configurable (Gespage scan or native scan).


Bux fixes and small enhancements

  • Improved eTerminal layout on Kyocera new models (TASKalfa MZ models)
  • Login management: Enhanced the robustness of user login by resolving potential login failures and reducing logout time after a scan.
  • Gespage scan: Fixed random cases where an additional empty scan was sent to the user.
  • Upgrade to SDK HyPAS 1.7.6 with API version 2.1.17 for improved compatibility.


GespageKyocera v1.7.5.0

Released  October 31, 2025


New features

  • Support for American paper formats (Letter / Legal) in the Gespage scan options
    • This configuration applies according to the server’s default paper size setting (compatible with Gespage 9.2 and above).



Bux fixes and small enhancements

  • Upgrade to SDK HyPAS 1.7.5 with API version 2.1.15 for improved compatibility.
  • Updated various translations for a smoother user experience.
  • Fixed support for MFP IPv6 configuration to ensure compatibility with modern network environments.


GespageKyocera v1.7.4.2

Released  October 7, 2024


Bux fixes and small enhancements

  • Improved card association: Extended the input timeout when users enter their username and password credentials for a smoother experience.
  • Enhanced login management with print code:
    • Fixed a random issue where the Login button was missing.
    • Corrected the handling when an empty print code is entered
  • Home page after login
    • Fix for Home Page Display: Resolved cases where the Gespage home screen was not properly displayed after logging.
    • Recommendation for Home Page Configuration: Starting with this version, it is recommended to configure the post-login screen to the Gespage home page. Note that the Gespage home page display can be customized via the admin menu. Other post-login screen modes will be deprecated in future versions.
  • MFP HyPAS API version information: In the eTerminal admin menu, under the deployment tab, the MFP HyPAS API version is now displayed in the deployment comments.


GespageKyocera v1.7.4.1

Released  February 14, 2024


Bux fixes and small enhancements

  • Fix card authentification issue when logout after a scan with many pages.


Known issue

  • On Kyocera series 54, if the user logs out while the scanning process in ongoing on the MFP, the MFP may freeze with F33C machine error


GespageKyocera v1.7.4.0

Released July 31,2023


Bux fixes and small enhancements

  • Gespage Scan
    • Fix a case wherre the copier is stuck with error F907 after duplex scan on the glass.
    • Fixe a case where card authentification doesn't work temporarily after a scan session
  • Upgrade to SDK HyPAS 1.7.4


GespageKyocera v1.7.2.2

Released May 9, 2022


Bug fixes and amall enhancements

  • Improve Gespage advanced scan management on Series 2 models
  • Fix wrong cases of automatic logout while scanning is in progress
  • Zero stop copy is better managed
  • Improve the management on printing options selection


GespageKyocera v1.7.2.1

Released January 17, 2022


Bug fixes and amall enhancements

  • Various improvements to Gespage advanced scan
    • Manage the scan in duplex mode
    • Better management of A3 scan
    • Better manage memory usage on multiple pages scans
  • Improve accounting for USB printing
    • Accounting report is corrected

Known Limitation

  • On Kyocera series 51 and older series, we recommend to disable the Gespage advanced scan feature due to limited memory.


GespageKyocera v1.7.2.0

Released September 15, 2021


Bug fixes and amall enhancements

  • Local configuration of the eTerminal
    • Enable SSL by default
    • Improve management of local configuration change
    • Fix in local Admin credentials verification-
  • Improve the management of network loss
  • In the mixed login screen, fix management of user/password login


GespageKyocera v1.7.1.0

Released June 7, 2021


New features

  • New Gespage main menu to be displayed after login
    • This menu provides shortcuts to Gespage print, Gespage scan, Copy, and MFP home menu
    • This menu can be disabled through an eTerminal parameter
  • New Gespage advances scan screen
    • Scanning destinations are configured through Gespage Flow feature (scan to email,

      scan to destination, scan to drive). They may differ depending on the user.

    • Provide a quick scan function (using default settings being displayed) and an

      advanced scan function (with selection of scanning options).

  • The advances scan settings screen in following

    • The default scan settings can be configured in Gspage, in the eTerminal general configuration settings




Bug fixes and small enhancements

  • Upgrade to SDK HyPAS 1.7.0


GespageKyocera v1.3.0

Released February 16, 2021


New features


  • New generation of Gespage eTerminal for Kyocera
    • New user interface in the Gespag eTerminal screens
    • Availability of mixed login feature (user/password and print code) (from Gespage 8.2.3)




Bug fixes and small enhancements

  • Fixed accounting of print jobs released automatically at login.
  • Properly restrict access to administrator menus following a previous administrator login



GespageKyocera v1.2.2

Released September 29, 2020


Bug fixes and small enhancements

  • Add support for MFP from Asian regions
  • Add ability to disable print release options in the print release screen.
  • [Lang] Add Spanish support
  • Display detailed error message to the user in case of insufficient credit


GespageKyocera v1.2.1

Released September 23, 2020


Bug fixes and small enhancements

  • This version is compatible with all Kyocera models (recent and old models).
  • [Lang] Add Swedish support
  • Fix display of pending jobs in case of many pending documents
  • $Fix support for the modification of the print job to BW by the user (requires Kyocera KX driver to be set in PCLXL mode)
  • Fix support for the modification of print job copies by the user

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.